One of the most hectic tasks in maintaining a household is the cleaning part. Whether you have to clean mere dishes or the exterior of the house, it requires both energy and time. That is why vinyl siding is the most common exterior in a house as cleaning it is not much of a hassle.
When you start observing the outside of your house getting dirty, pick up a pressure washer and just go to town. It is the most used technique that people opt for. However, there are some protocols that you have to follow.
If you are new to all this and are here to look for ways to clean it, don’t worry! We have outlined the easiest steps that you can follow to get the job done.
1. Investigate Your Surroundings
The first step when it comes to cleaning your vinyl siding is inspecting the walls. By doing so, you ensure that there is no damaged area through which water can enter the house. For this purpose, check the walls as well as the windows before you start working with the pressure washer.
2. Prepare Planted Areas by Watering
Next, start with the areas near the house that are covered with plants. Soaking the soil of the garden is necessary to save plants from harmful chemicals that are present in a detergent and might be harmful to plants.
3. Secure the Surrounding Objects
Make sure that all the surrounding objects of the area getting cleaned are secure. Cover all electric outlets and other fragile items. If there is electric wiring in the area, make sure they are not on. The last thing you want is an even bigger price to pay for the cleaning.
The pressure of the water might damage any nearby furniture, plants or even your car, so make sure you protect them as well.
4. Clean Mold
Before you start with rinsing the wall, first clean away the mold that might have set over time. For this purpose, use bleach and other cleaning agents to get rid of stubborn mold. These steps will improve the cleaning when you use the pressure washer. Make sure you have taken precautionary measures before using bleach.
5. Choose the Right Pressure for the Water
Now that you have taken care of all the preliminary steps, it is time to finally spray the vinyl siding. Make sure that you start with a low pressure and adjust it according to your needs. Don’t keep it too low or too high. An average of 1500 psi is enough to begin cleaning.
6. Start with Small Areas
An important thing to note when working with a pressure washer is that you need to start with small areas. After you have adjusted the pressure and are busy rinsing, pick small areas. This will help you get rid of settled dirt from every nook and cranny. After you get done with this, you can spray across the area to wash all the dirt away.
7. Choose the Right Cleaning Detergent
Moving onto the actual cleaning part, use a detergent that has been made for this purpose. You can buy a detergent for pressure washer from almost anywhere. Some detergents have chemicals that can ruin your sidings and windows, which is why protecting your belongings is highly important. Use a spray tip as well, which will help spread the soap across the area with the right pressure.
8. Applying the Cleaning Product
The tricky part in cleaning the vinyl siding is that you don’t miss any areas and the soap gets to all the right spots. Start from the bottom and keep your spray in a position such that it pushes the dirt away rather than soaking it.
As sidings are overlapping each other, a wrong angle can make the dirty water stay there or even get inside. You need to pay attention to this as it can damage the walls in the long term.
Apart from this, pay attention to the amount of soap in the washer as it will need refills.
9. Let It Stay for a Minute or Two
This is an essential step as it plays a major role in cleaning. The cleaning agent will work best when it stays for a few minutes. Leaving it will let it clean all the stubborn marks and molds. Once the cleaning solution has been applied, you can take a break. However, make sure the solution doesn’t get dry or else it will ruin all the hard work you have done till now.
10. Scrub the Dirt Away
Now is the time to clean the corners. As you have already taken care of larger molds, scrub away the dirt from the corners. After applying the detergent with the pressure kit and letting it stay, scrub the area using a brush.
There are also brushes that can you can attach to the washer. This will improve your cleaning as it will work with force without needing a lot of effort.
11. Get Clear Water
Before you start rinsing the soap away, make sure you get rid of the soapy water. Fill the washer with clean water before you start spraying it on the wall.
12. Clean with Pressure
The last step is to clean the walls. For this purpose, it is advisable to keep the pressure a bit higher than before. Make sure you are spraying from an angle that washes the soap downward without damaging the siding. If it is not washed away properly, it can do more harm than good.
Use a ladder to clean the upper surface and keep the washer at a distance so that you don’t damage the vinyl siding. This measure will also prevent you from soaking yourself in water.
13. How to Dry
You should choose the spring or mid-summer season for cleaning your house’s exterior. This is because the walls will get dry on their own. You should start early on so that you can end earlier and rest or go about your other chores while the sun is still out. This is also beneficial for your walls as heat will help them dry, which can take anywhere from a few hours to a complete day.
There are some of the basic steps that you need to take care of when you begin cleaning your vinyl siding. The power wash is a convenient way of cleaning your wall, but you have to be sure about the distance and pressure to ensure no damage. It is recommended to use a pressure washer at least once a year to get rid of mold, dirt and insects.
There are some other precautionary measures that you should take care of:
- Prepare yourself and the area before working. This means that after you have secured the surroundings, make sure you are secure as well. Wear gloves to avoid any irritation from the detergent. You can also wear masks so that you don’t inhale toxic chemicals.
- Keep adjusting the pressure according to your need. Using a low pressure can be very time-consuming, while high pressures can damage the walls and windows.
- After you are done, give a thorough look around for any damage. Also, clear the gathered water so that mold doesn’t grow there.
- Clean your vinyl siding with a pressure washer regularly. This will help prevent insects and harmful bacteria from growing around.
In the end, cleaning your vinyl siding can be a fun task. You can use this technique to get rid of stains like paint as well. So, pick a sunny holiday and get to work! You are about to give your house a fresh look all over again.